2019 Bad Boy Rogue 61″ Yamaha 824cc

//2019 Bad Boy Rogue 61″ Yamaha 824cc

2019 Bad Boy Rogue 61″ Yamaha 824cc

$11,899.00 $10,099.00

Out of stock

Out of stock



From the professional class dual hydraulic pumps and drive motors to our exclusive New EZ-Ride 3-link trailing suspension, the Rogue doesn’t give an inch to our other Outlaw Class mowers—except more deck inch options. Available in sizes from 54˝ to 72˝ with many engine options, you can’t go wrong with the Rogue for professional-class performance and cut. There’s just never been a better zero-turn time to go Rogue.

All New 1.5˝ x 3˝ Heavy-Gauge All-Steel Rail backbone.

All New Patented independent cast front iBeam suspension rails.

Patented Dual Deck Support Isolators, paired with our new deck wear pad, minimizes damage from side impacts.

All New 3-Link Rear Trailing Arm Suspension — the first and only of its kind in the industry. Matched with front suspension arms, to provide a smoother ride, more consistent tire contact and increased hillside stability.

All New high-back seat for all day comfort and support.

All New Sloped 1/4˝ Deck with 3/8˝ sides. The front deck chamber allows the grass to stand at a more natural, upright position before contact with the cutting blades.

All New Deck Idler Arm and Deck Spring with bearings for consistent belt tension and more consistent cutting speed.

PEER Spindles, made of ductile iron, are 60% stronger than aluminum housings. Optimized for a maintenance-free spindle.

Dual 16cc Hydro-Gear Pumps with 18ci Parker Wheel Motors, preferred by professionals.

Cutting Width 6100 – 61″; 7200 – 72″
Cutting Height 2″ – 6″ In 1/3″ Increments
Blades 6100 – 1/4″ x 2 1/2″ x 21″, High Lift, Heat Treated
7200 – 1/4″ x 2 1/2″ x 24″, High Lift, Heat Treated
Lift and Height Adjustment Foot-Assist Manual Lift With Dial-Style Height Adjustment. Optional Electric Lift
Blade Belt Single V-Belt Spring Tension
Anti-Scalp Rollers 6 Total (4 Double-Bracketed Front Wheels, 2 Rear Wheels)
Deck Flotation Floats On Four 1/4″ Deck Hangers
Deck Thickness 1/4″ Thick Solid Steel With Additional 1/4″ Steel Leading Edge And 3/8″ Side Trim

Gross Horsepower/CC 824cc (33hp) Air-Cooled Yamaha® EFI
Cylinders V-Twin
Displacement 824 cc
Maximum Torque 59 ft. lbs. @ 2,600 RPM
Fuel Requirement Unleaded Gasoline (87 Octane or higher)
Fuel Capacity 13 Gallons
Fuel Filter Replaceable Automotive Type
Cooling System Air-Cooled
Ignition Electronic
Starter 12 Volt
Charging System 20 Amp

Transmission Dual Hydrostatic
Pump Drive –
Wheel Drive 18 cu. In. High Torque Parker Motors®; 18 cu. In. High Torque Parker Motors®
Hydrostatic System Oil 20W50 Motor Oil
Hydraulic Filter 25 Micron, Replaceable Spin-On Type, 1 Per Pump
Pumps 16cc Hydro-Gear® Pumps
Hydraulic Coolers 6″ 3,600RPM Cooling Fan; One Per Unit

Weight 6100 – 1,445 lbs.; 7200 – 1,480 lbs.
Overall Height 53″
Overall Width
Chute Up/Chute Down 6100 – 63 1/2″/75 1/2″; 7200 – 74 1/2″/86 1/2″
Overall Length 92″
Tire to Tire Width 6100 – 59″; 7200 – 59″
Tires – Front 15 x 6.0 – 6 Smooth Tread
Tires – Rear 26 x 12 – 12 Reaper Tires
Steering Dual Lever Steering, Independent Control
Turning Radius Zero Turn – Zero Degrees, Turns Within Unit Length
Ground Speed (forward) Up To 13 mph
Parking Brake Internal Parking Brake


There are no reviews yet.

Be the first to review “2019 Bad Boy Rogue 61″ Yamaha 824cc”

Your email address will not be published. Required fields are marked *